Automatic Ladles KD1-M5 Series
- With a linkage and full-bearing structure adopted to the driving unit, the automatic ladle can be operated smoothly with a minimum secular change. (*1)
- ・A dedicated inverter-driven AC motor and a link arm mechanism ensure smooth operation.
- ・Ball bearings are used.
- ・A link mechanism is used for part of the ladle drive system, ensuring minimal change of pouring volume with time.
- ・The arm driving motor is equipped with a brake for increased stopping accuracy.
- ・Pre-tilting, and quick return of the ladle can be made by a microprocessor control. realizing high-cycle operation.
- ・Pouring volume can be easily adjusted by remote control.
- ・Changeover between acceleration and deceleration is smooth, and operation is shock-free even at high-speed
- ・High-low-high three-step pouring speed control. The use of a sleeve with a rectangular opening realizes hopper-less pouring.
Automatic Spray Units SD2-M5 Series
- The spray control devices are integrated in a dedicated valve box to facilitate maintenance and adjustment.
- ・Can be installed on a fixed die plate. Microprocessor control makes operation simple. An early-starting function contributes to high-cycle operation.
- ・Spraying patterns can be chosen by mode setting.
- ・Nozzle cassettes can be changed quickly for each job.
- ・Easy-to-use, dedicated air blower is provided.
- ・The nozzle unit automatically swings 90 degrees to prevent the nozzle from hitting the core cylinder.
- ・The up/down cylinder is automatically locked at the upper limit.
- ・A dedicated valve box facilitates replacement of units.
- ・The adjustment valves are collected in a single panel to facilitate adjustments.
Automatic Extractors TD5L-M5 Series
- Smooth and high cycle operation by adoption of a dedicated inverter motor for driving arm.
- ・TD5L-M5 can be mounted on the die-casting machine, and it automates the extraction work.
- ・A dedicated inverter-driven AC motor and a link arm mechanism ensure smooth operation.
- ・The arm driving motor is equipped with a brake for better stopping performance.
- ・The main bearings are ball bearings.
- ・The moving arm has no electrical components, thus minimizing trouble and facilitating maintenance work.
- ・A microprocessor-controlled early-starting function realizes high-cycle casting.
- ・The unique link mechanism permits the ideal extraction motion followed by 90-degree swinging.
- ・The extractor can be installed directly on the die casting machine, conserving floor space.
- ・A new chucking mechanism does not need tip diameter size adjustment.
Vacuum Unit VCSU-15
- ・This unit is controlled by a microprocessor of the die-casting machine. The wiring between this unit and the die-casting machine can be made easily using a metal conduit.
- ・An air purging function blows out aluminum burrs in the piping.
- ・An alarm signal is issued when the pressure inside the tank rises beyond 20 KPa.
Automatic Dilutor AD-35
- ・Easy automatic dilution operation.
- ・The dilutant is automatically replenished when the level in the dilutant tank falls.
- ・Easy feed pressure adjustment.
- ・Spraying can be continued even while the raw liquid pail is being replaced.
- ・Uses a highly reliable air-driven pump.
